Home  /   Duplosil DM

Duplosil DM


*Fluid silicone with platinum addition system for model duplication

CHARACTERISTICS


- High precision in reproduction of small details.

- Minimum linear shrinkage, lower than 0.1%.

- Excellent detaching capacity from plaster, investments and acrylics.

- High elasticity, hardness SHORE A: 26 deg – 28 deg

USE

  • Mix for 40 sec. the same amount of white component A and blue component B (base) in a graduated plastic beaker until a uniform color is reached.
  • Slowly pour the silicone mixture on the model from a 30 cm height to avoid air bubbles. If possible, before pouring subject the mixture to a slight vacuum.
  • Remove model after 20-30 min. It is advisable to use an air jet to avoid damaging of the model.
  • The quantity to be used may vary from 70 gr to 170 gr total.

MIXTURE RATE: 1:1

WORKING TIME: 4-5 min. at 20 deg C

Working time decreases considerably if temperature increases.

SETTING TIME: 20-30 min. at 20 deg C


PACKAGE

  • 1 Kg. Can component A white – catalyst
  • 1 Kg. Can component B blue – base

ECONOMIC PACKAGE

  • 5 Kg. Can component A white – catalyst
  • 5 Kg. Can component B blue – base

CALL TO ORDER